Table Of Contents - Crime Guard 650i5 Operation Manual

Feature #23 Lock Relay Functions
Factory Default Setting Door Lock Output
( press "arm/lock" button to program
Options:
press "disarm/unlock" button to program
Parking Light Output (
Channel 4 Latch Output ( press "II" button to program
Channel 4 On Demand Output
The Crime Guard 650i 5 has two built-in relays, which can be programmed to
perform several different functions. Although the primary function, or default
setting, of this relay is to operate as a door "lock" function, there are many vehicles
which don't actually require a relay in which case the relay is available for the
optional functions. Other options for this relay are parking light flash, and an
additional remote output, operated by the transmitter's "arm/lock" and "II"
buttons together, and in two forms: "Latch", in which the output toggles with each
buttons press, and "On Demand" which is output while the buttons are being
pressed. Feature #21 can change this channel's button assignment.
Feature #24 Unlock Relay Functions
Factory Default Setting Door Unlock Output
( press "arm/lock" button to program
Options:
Horn Output ( press "disarm/unlock" button to program
Channel 5 Latch Output ( press "II" button to program
Channel 5 On Demand Output
This is the second of two built-in relays which can be programmed to perform
several different functions. As described above for the "lock" relay, the primary
function of this second relay is the "unlock" function, which in many cases is not
required and making the relay available for other uses. In the case of this relay, a
very popular application is operating the vehicle's existing horn; either in conjunc-
tion with the electronic siren, or in place of the siren. Using both the siren and the
horn creates an extremely effective security system. The remaining options are
Channel 5, with the same operation parameters as described above for Channel 4,
except that the "disarm/unlock" and "III" buttons operate it.
)
)
press "III" button to program
( )
)
)
press "III" button to program
( )
Page - 30
Introduction to the System ..................................................... 4-6
)
Transmitter, Status Light, Valet Switch
System Versatility -
Using the Crime Guard System .............................................. 7
Arming Using the Transmitter ................................................ 7-8
Arming Bypass, Sensor Bypass
Automatic "Last Door Arming" of the System ...................... 8-9
While the System is Armed, and should it Trigger ................ 9
Prewarning
Disarming the System Using the Transmitter ......................... 10-11
Safety Disarm Feature; Activation Alert; Automatic Rearming
Disarming By Emergency Override ....................................... 11
Remote Panic Feature ............................................................. 12
Other Transmitter Operations ................................................. 13
Silent Arming & Disarming
)
Using the Valet Switch ........................................................... 14
SecureCode .............................................................................. 15
The Status Light ...................................................................... 16
Anti-Carjacking Protection ..................................................... 17
Transmitter Protection ............................................................. 18
How to Program Transmitters ................................................. 18-19
Programmable Features List ................................................... 20
How to Program Features ....................................................... 21-22
Programmable Features Descriptions ..................................... 22-30
Programmable Features Matrix .............................................. 31
Limited Lifetime Warranty .............................................. Back Cover
This Booklet Contains
An Important Note ........................................
,
Sensor Bypass; 2nd, 3rd, 4th & 5th Channels
Page - 3
5-6