Selecting The Print Quality - Oki ML3310e Help Manual

Selecting the Print Quality

Important! Front panel settings for print quality and
character pitch can be overridden by software
commands. The lights will always reflect the
printer's state.
Press PRINT QUALITY to select:
NLQ: Near Letter Quality
• Highest quality, slowest speed
• Courier or Gothic fonts
• Recommended for correspondence
UTL: Utility
• Medium quality, medium speed
• Gothic font only
• Recommended for
high-volume data.
HSD: High Speed Draft
• Lower quality, faster speed
• Gothic font only
• Recommended for preliminary drafts.
Help Guide
internal documents
SSD: Super Speed Draft
• Lowest quality (12 cpi only), fastest speed
• Gothic font only
• Recommended for fastest output of preliminary drafts.
In order to use Super Speed Draft (SSD), you must enter
the Menu Mode and make changes:
1 . Press SHIFT + SEL.
2 . Press GROUP twice.
3 . Press ITEM.
4 . Press SET until DRAFT appears as the setting for the
Print Mode.
5 . Press ITEM.
6 . Press SET (SSD appears as the setting for the Draft
Mode).
and
7 . Press SHIFT + SEL key to exit the Menu Mode and
save your changes.
13