Printing Demo Patterns - Oki Microline 320 User Manual

Printing Demo Patterns

1. First load the printer with the correct paper.
2. Switch off the power to the printer.
3. Choose the demo pattern you want to produce
and associated button, from the following table.
4. Keep pressing the button and turn on the power.
The self test will start almost immediately.
5. In self test mode, the printer senses the paper
end signal and stops printing. If you want to
interrupt printing press the MODE button.
6. When the self test is completed, the SEL lamp
will come on.
7. Your printer is now ready to receive data from
the computer.
No. LINE
FEED
1 *
2 *
3
4
* Press this button while switching on the printer.
TOF/ Position
Quiet of the
Group Paper lever
Continuous
paper
Cut-sheet
paper
* Continuous
paper
* Cut-sheet
paper
Content of
Self-test
Demo pattern
self test once
Demo pattern
self test once
Rolling ASCII
self test series
Rolling ASCII
self test series
E – 23