2.
Input the number of the item to set. Detailed information about the selected item is
displayed.
Please select (1 - 99)? 2
No. Message
-------------------------------------------------------------------
1 : AppleTalk
2 : SMB
3 : NetWare
4 : LPD
5 : SNMP
6 : IPP
7 : Port9100
8 : UPnP
9 : Receive Mail
10 : Mail Notification
11 : Internet Services
12 : Telnet
99 : Back to prior menu
Please select (1 - 99)?
Note
• Each menu is configured with some levels. Set the settings by selecting the menus and items of each
level. For details about the items of each menu, refer to "The Items That Can Be Set Using the Telnet"
(P. 66).
3.
After completing the settings, select [Back to prior menu] to return to the main menu.
Please select (1 - 99)? 99
No. Message
---------------------------------------------------------------
1 : Machine Details
2 : Port Status
3 : Protocol Settings
4 : Display status
5 : IP Filtering Setup
6 : Internet Services Settings
98 : Set default (Network)
99 : Exit setup
Please select (1 - 99)?
4.
Select [Exit setup] in the main menu, and then select [Save and Reset].
When the items needed to restart the printer are changed, the printer restarts.
Please select (1 - 99)? 99
No. Message
---------------------------------------------------------------
1 : Save and Reset
2 : Exit without Saving
99 : Back to prior menu
Please select (1 - 99)? 1
Connection closed by foreign host.
%
Value
: Enable
: Enable, TCP/IP, NetBEUI
: Enable, TCP/IP IPX/SPX,
: Enable
: Enable, UDP, IPX
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
Value
(level.2)
Value
(level.2)
(level.2)
65
A.1 Using Telnet