Printing From Unix; For Printing From Unix; System Configuration; Target Computers - Oki B6200 Series User Manual

6

Printing From UNIX

6.1

For Printing From UNIX

This section explains the installation procedure for printing from a UNIX computer.

System Configuration

The printer uses the Line Printer Daemon Protocol (LPD) that supports TCP/IP as the
transport protocol. With the LPD, use the printer under a UNIX network environment.
The printer LPD supports Spool Mode where print jobs from clients are spooled once before
output and Non-spool Mode where print jobs are sequentially output without spooling.
Note
• When the LPD port is used, the printer can limit print instructions by IP addresses. For details, refer to
the User Guide.

Target Computers

The target computers are as follows:
• Workstation or personal computer with RFC 1179 Line Printer Daemon Protocol

Interface

The printer LPD is available on the following interfaces:
• Ethernet 100BaseTX
• Ethernet 10Base-T
The applicable frame types conform to Ethernet II.
UNIX
LPD (TCP/IP)
6.1 For Printing From UNIX
25