Return to the Top page
Basic Operations
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
].
For details on operation, see
Panel color coordinate
EXT SW (DNN990HD only)
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for device. Then, touch [
EXT SW setup
(P.131).
For details on operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
].
Camera Setup
(P.135).
For details on operation, see
Demo mode
Set the demonstration mode. Default is "ON".
1 Touch [ON] or [OFF].
4
Touch [Finish].
NOTE
Setting Up
• These settings can be set from the SETUP menu. See
18
(P.133).
].
(P.128).
Return to the Top page
Basic Operations
19