2-6.
CD MECHANISM DECK BLOCK (1)
Note 1 : Before disconnecting the wire (fl at type) (24 core) of optical pick-up block, solder the short-land.
two claws
2
5 Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (24 core).
2-7.
CD MECHANISM DECK BLOCK (2)
5 insulator
1 four insulator screws
6 device, optical
(KHM-313CAB/CZRP)
2
7 belt (MOT)
belt (MOT)
– CD mechanism deck block bottom view –
FFC holder
4
3 two claws
– CD mechanism deck block bottom view –
5 insulator
3 connector
5 insulator
4 wire (flat type) (24 core)
5 insulator
HCD-SH2000
wire (flat type)
6
(24 core) (CN101)
3 two claws
1 CD mechanism
deck block
9