Know Your Pressure Washer - Craftsman 580.752990 Operator's Manual

KNOWYOURPRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A - Spray Tips -- Detergent, 0°, 15°, 25° and 40°: for various high
pressure cleaning applications.
B - High PressureHose-- Connect one end of hose to pump and
the other end to spray gun.
C - Project Pro@ PerfectMWM Siphon -- Mixes concentrate with
pressure washer spray.
D - Throttle Lever -- Sets engine in starting mode for recoil starter
and stops a running engine.
E - Choke Lever -- Used when starting a cold engine.
F - Fuel Valve Lever-- Usedto turn fuel supply on and off to engine.
G - Recoil Starter-- Used for starting the engine manually.
H - Warning/Operating InstructionsTag-- Identifieshazards and
proper procedure to start/stop pressure washer.
J - Bottle Bracket -- Cleaning solution bottle fits in wire form
bracket here.Concentrate bottle not included.
K - Nozzle Extensionwith Quick Connect -- Allows you to switch
betweenfive different spray tips.
L - Pressure Control Knob-- Varies pressure of high pressure spray.
IVi- Automatic Cool DownSystem -- Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.
N - Detergent SiphoningTube/Filter -- Useto siphon pressure
washer safe detergents into the low pressure stream.
P - Water Inlet -- Connection for garden hose.
R - High Pressure Outlet -- Connection for high pressure hose.
S - Oil Drain-- Drain engine oil here.
T - Oil Fill -- Check and add engine oil here.
U - Pump -- Develops high pressure.
V - Air Filter -- Protects engine by filtering dust and debris out of
intake air.
W - Fuel Tank -- Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.
X - Spray Gun-- Controls the application of water onto cleaning
surface with trigger device, includes trigger lock.
items Not Shown:
EngineIdentification -- Provides model, type and code of engine.
Pleasehave these readily available if calling for assistance.
identification Label (near rear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if calling for assistance.