Cisco 7961G Phone Manual page 55

If you want to...
Dial from a call log
(while connected to
another call)
See if the line in the
call log is busy
before placing a
call to that line
Tip
To view the complete call record of a multiparty call, press Details. The Details call record shows two
entries for each missed or received multiparty call. The entries are listed in reverse chronological order:
• The first logged entry is the name/number of the last completed call of a multiparty call received
on your phone.
• The second logged entry is the name/number of the first completed call of a multiparty call
received on your phone.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SCCP)
Then...
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record from the log.
Note If the Details softkey displays, the call is the primary entry of a multiparty
call. See the Tip section below.
3. If you need to edit the displayed number, press EditDial followed by << or
>>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4. Press Dial.
5. Choose a menu item to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• Transfer—Transfers the first party to the second and drops you
from the call. (Press Transfer again after dialing to complete the
action.)
• Conference—Creates a conference call with all parties, including
you. (Press Confrn again after dialing to complete the action.)
• EndCall—Disconnects the first call and dials the second.
Look for Busy Lamp Field indicators. See the "Using BLF to Determine a Line
State" section on page 41.
Using Call Logs and Directories
47