Hotpoint 22 Owner's Manual & Installation Instructions page 5

About the shelves and bins. He, ei,,cem
Not all features are on all models.
Rearranging the Shelves
Shelves in the reflJgerator and fl'eezer comi_artn]ents are a(!iustnble.
Refrigerator Compartment
To remove:
0 Tilt the shelf up at the fl'ont.
@ I,ifl the shelf up at the back and bring
the shelf out.
Some models have wire shelves that
can be adjusted in the same mam_e_
ii"[
I _ iii
To replace:
0 _'_ hile tilting the shelf up, insert the top
hook at the back of the shelf in a slot
on the track.
@ I.ower the fl'ont of the shelf tmfil the
bottom of the shelf locks into place.
Freezer Compartment
To remove:
I,ifl up the left side ot the shelt and
slide it left into the center of the shelf
supI) orts.
__ @ Rotnte the right side of the shelf up and
out of the shelf sui)ports.
iii _II e , _iii
To replace:
0 Holding the shelf diagonall); insert the
left end of the shelf into the center of
the shelf sui)i)orts on the side wall at the
desired lex el.
@ Insert the right end of the shelf into the
shelf supI)orts
at the same le'.el. Rest
each end of the shelf on the bottom of
the shelf supI)orts.
NOTE." For models with an automatic lcemaker,
the freezershelf must be in the lower position
for the ice cube bucket to catch the cubes.
Spillproof Shelves (onsomemodels)
Spillproof shelves have special edges to
help pre_ent spills fl'om dripping to lower
shelxes, To remoxe or replace the shelxes,
see Rearrangingthe Shelves.
rJ_
I
ii!iiiiii_i_iiiiiiiiiiii
w
i
H