Hotpoint 22 Owner's Manual & Installation Instructions page 17

Installation instructions
[] REMOVE THE FREEZER DOOR
Tape the door shut with masking tape.
I_.emoxe the hinge coxer on top of the freezer door
(on some models).
]_emoxe the two screws, then lift the hinge straight
up to fl'ee the hinoe_ _,)in from the socket in the top
of the door.
Tape the door shut with masking tape.
Remove the tape and tilt the door away from the
cabinet. I,ifl it off the center hinge pin.
Set the door on a non-scratching surtace with
the inside up.
[] REMOVE THE REFRIGERATOR
DOOR
Tape the door shut with masking tape.
a 3/4 socket.
Remoxe the center hinoe_ pin with ' "
Hinge Pin 4
Remo_e the tape and tilt the door away fl'om the
cabinet, i,ifl the door straight off the bottom him,e
bracket,
Set the door on a non-scratching surface, with the
inside up.
CAUTION: Do not let door drop to the floor.
To do so could damage the door stop.
[] TRANSFER TOP HINGE TO
THE LEFT
Interchange hinge and screws at top right with
screws at the top left of cabinet.
Do not tighten screws on hinge side at this time.
17