Edimax BR-6204WG User Manual page 57

Note: If the total assigned bandwidth of higher priority applications is larger
than the maximum bandwidth provided by the WAN port, the other
applications will not get any bandwidth.
Parameters
Enable/Disable QoS You can check "Enable QoS" to enable
QoS function for the WAN port. You also
can uncheck "Enable QoS" to disable QoS
function for the WAN port.
Add a QoS rule into the table Click "Add" then you will enter a form of the
QoS rule. Click "Apply" after filling out the
form and the rule will be added into the
table.
Remove QoS rules from table If you want to remove some QoS rules from
the table, select the QoS rules you want to
remove in the table and then click "Delete
Selected". If you want remove all QoS rules
from the table, just click "Delete All" button.
Click "Reset" will clear your current
selections.
Description
56