Sony HDWM2000/20 Operation Manual page 152

Specifications
HD/SD video output phase settings
For the HD/SD video output phase setting, you can use
the maintenance menu.
For details, refer to the Installation Manual.
Item number Item name
M3 M3A:
OUTPUT
PHASE
SELECT
Notes
• The SDSDI (D1) output and component/composite
outputs have the same phase.
• For item M3A2 is HDW-M2000/M2000P only.
For details of the audio/timecode output phase, see Setup
menu item 338.
A-8
Appendix
Settings
M3A0: Select the HD video output signal phase with respect to the reference signal: 0H
HD PHASE or -90H (HD) advanced.
SEL
0H : Output in sync with the reference signal.
–90H: Output with the phase delayed by –90H (HD) with respect to the reference
signal.
M3A1: Select the SD video output signal phase with respect to the reference signal: 0H
SD PHASE or –2H (SD) advanced.
SEL
0H : Output in sync with the reference signal.
–2H: Output with the phase delayed by –2H (SD) with respect to the reference
signal.
M3A2: Select whether the SD video output signal phase in SD tape playback should be
SD UPCNV in sync or one frame delayed.
SEL (HDW-
noml : Output the SD video with the phase unchanged. (The HD video output is
M2000/
delayed by one frame with respect to the reference signal.)
M2000P
HD: Output the SD video with the phase delayed by one frame. (The HD video
only)
output and SD video output are in phase with the reference signal.)