Sony HDWM2000/20 Operation Manual page 136

10-4 Items in the Extended Setup Menu
Menu items in the range 900 to 999, relating to digital processing (continued)
Item number Item name
939 H DETAIL FREQUENCY
(DC)
(Invalid in 24PsF or
23.98PsF mode)
940 H/V RATIO (DC)
(Invalid in 24PsF or
23.98PsF mode)
GAMMA LEVEL (DC)
941
(Invalid in 24PsF or
23.98PsF mode)
942 V FILTER SELECT
(Invalid in 24PsF or
23.98PsF mode)
943 CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode)
950 UP CONVERTER MODE
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
951 H CROP POSITION (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
952 LETTER BOX POSITION
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
953 UP CONVERTER
PROCESS SELECT
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
954 DETAIL GAIN (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
955 LIMITER (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
956
CRISP THRESHOLD (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
LEVEL DEPEND
957
THRESHOLD (UC)
(HDW-M2000/M2000P
only. Invalid in 24PsF or
23.98PsF mode.)
10-32
Chapter 10 Setup Menus
Settings
Carry out the down-converter image enhancer adjustment. Set the central
frequency for edge enhancement.
2.6MHz to 3.4MHz to 3.9MHz to 4.6MHz
Carry out the down-converter image enhancer adjustment. Set the horizontal/
vertical ratio for edge enhancement.
0 to 3 to 7
Carry out the down-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
Set the vertical interpolation filter coefficient for HD-SD converter output.
The vertical resolution increases as the setting grows larger.
1 to 3
Set the cross color crisp level for HD-SD converter output.
0 to 4 to FH
Select the up-converter mode.
crop : Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
Adjust the "H-crop" (the horizontal position when inserting in the edge crop mode)
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
Adjust the vertical position of the letter box mode cutout in up-converter output
when l-box is selected in menu item 950.
–120 to 0 to 120
Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still picture priority mode): Set the ratio of converting from frames
higher when up-converting.
adap3 (motion priority mode): Set the ratio of converting from fields higher
when up-converting.
Carry out the up-converter image enhancer adjustment. Adjust the sharpness of
edge emphasis.
0 to 40H to 7FH
Carry out the up-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
Carry out the up-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to 8 to FH
Carry out the up-converter image enhancer adjustment. Set the luminance range
for edge enhancement.
0 to 8 to FH
(Continued)