Adf Unit - Brother DCP7010 Service Manual

5.1.8 ADF unit

(1) Open the ADF unit and scanner unit.
(2) Remove the one cup S M3x6 taptite screw and ADF FG harness and FB FG harness.
(3) Disconnect the two connectors of the ADF unit from the main PCB.
(4) Disconnect the two connectors of the scanner unit from the main PCB.
ADF unit
FB motor harness
ADF sensor PCB harness
FB FG harness
ADF motor harness
ADF FG harness
Taptite, cup S M3x6
Panel PCB harness
FFC CIS
Main PCB
Panel PCB connector
FFC CIS connector
ADF sensor PCB connector
ADF motor connector
Main PCB FB motor connector
5 -1 1 Confidential