Additional Information; Update Software - Philips BDP7500 User Manual

[On] - Internet access is prohibited for all BD-
Live contents.
[Off]- Internet access is permitted for all BD-
Live contents.
[Network]
Set up a connection to internet to download
updated software and access BD-Live bonus
contents. It guides you through a step-by-step
network installation procedure.
Note
network".
[Software Download]
the playability of this product.
[USB] - Download software from the USB
device which is connected to this product.
[Network] - Download software from
network.
Note
[Clear Memory]
Note
When you clear the local storage, previous download of
BD-Live bonus contents is no longer available.
If the internal memory of this product is not enough
to download BD-Live bonus contents for a BD disc,
reformat the local storage to clear all the contents.
Note
You can use a USB device as an external storage to store
connected USB device.
[DivX® VOD Code]
Tip
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
device to which it is registered.
[Version Info.]
Display the software version and the MAC address
of this product.
Tip
This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory
settings, except for [Parental Control] setting.

7 Additional Information

Update software

For software updates to enchance performance,
check the current software version of this product to
Philips website.
1
Press .
2
Select [Settings], then press OK.
3
Select [Advanced Setup] > [Version Info.],
then press OK.
Update software via network
1
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
»
You are prompted to start upgrading
processs if upgrade media is detected.
3
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
4
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Update software via USB
1
the latest software version is available for this
product.
2
a Un-zip the download, and make sure that
the un-zipped folder is named "UPG".
b Put the "UPG" folder in the root
directory.
EN 21