Additional Information; Update Software; Update Software Via Usb - Philips BDP2500 User Manual

Tip
•
Use this product's DivX registration code when you rent or purchase video from www.divx.com/vod.
The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
[Version Info.]
Display the software version and the MAC address of this product.
Tip
•
This information is needed for you to check if a latest software version is available at the Philips
website so that you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory settings, except for [Parental Control] setting.
7

Additional Information

Update software

For software updates to enchance performance, check the current software version of this product to
compare with the latest software (if available) at the Philips website.
1
Press .
2
Select [Settings], then press OK.
3
Select [Advanced Setup] > [Version Info.], then press OK.

Update software via USB

1
Go to www.philips.com/support to check if the latest software version is available for this
product.
2
Download the software onto a USB flash drive.
a
Un-zip the download, and make sure that the un-zipped folder is named "UPG".
b
Put the "UPG" folder in the root directory.
3
Insert the USB flash drive to the USB jack of the rear panel.
4
In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [USB].
5
Follow the instructions on the TV screen to confirm update operation.
»
Once software update is complete, this product automatically turns off to standby.
6
Disconnect the power cord for a few seconds and connect again to turn on this product.