Primary Alarm - Furuno FAR-2107(-BB) Operator's Manual

1.44.4

Primary alarm

Violated alarms appear in the Alert Box in the order of priority shown in the table
below.
Priority
1
2
3
If desired you can assign primary alarms the same priority as Error alarms.
1. Left-click the MENU box to open the menu.
2. Select 3 [ALARM].
3. Select 0 [PRIMARY ALARM].
4. Select alarm(s) for which you want to give priority equal to that of Error
alarms. Selected alarms are underlined.
5. Press the right button several times to close the menu.
Alarm group
Error (sensor Azimuth, Datum EPFS, Gyro, Headline, Key, Log, RF,
and system) Trigger, TT System Error, Video
Primary See the PRIMARY ALARM menu below. TT CPA LIMIT
and NO CPA/TCPA FOR AIS are ON in default.
Other alarms Any alarm not listed here.
[PRIMARY ALARM]
1 BACK
2
TARGET ALARM
WATCH ALARM
TT NEW TARGET
TT LOST TARGET
TT AUTO ACQ TGT FULL
TT MAN ACQ TGT FULL
AIS NEW TARGET
AIS LOST TARGET
AIS TGT FULL
XTE
ARRIVAL WPT
DEPTH
ANCHOR WATCH
NO CPA/TCPA FOR AIS
PRIMARY ALARM menu
1. RADAR OPERATION
Alarms
1-89