Extending The Metal Handle; Inserting The Metal Handle Into The Main Body; Attaching The Floor Brush To The Main Body; Operating Instructions - Euro-Pro Shark EP601 Owner's Manual

NOTE: Always remove the power plug
from the wall outlet before assembling or
removing accessories.
EXTENDING THE METAL HANDLE
Push the plastic button and pull out the
smaller tube. See illustration below.
INSERTING THE METAL HANDLE
INTO THE MAIN BODY
• Push in the pin at the end of the metal
handle (see illustration).
o Insert the metal handle into the hole
next to the handle. Make sure that the
slot in the handle fits correctly into the
opening. (See illustration.)
, When inserted correctly, the pin should
rest in its hole..
ATTACHING THE FLOOR BRUSH
TO THE MAIN BODY
. Push in the pin in the floor attachment
as shown in the illustration at righL
• Insert the floor brush into its location,
in the direction of the arrow,
. When inserted correctly, the pin will
show in the pin hole.
ATTACHING THE HOSE TO THE
MAIN BODY
• Press in the pin at the end of the
hose (see illustration below).
• Insert the hose into its place (see
arrow in illustration)
• When inserted correctly, the pin will
show in the pin hole.
4