Kenmore 116.21614 Use & Care Manual page 23

Always follow all safety precautions when performing maintenance to the PowerMate.
WARNING
Electrical Shack Or Persanal injury Hazard
Always turn aft and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure ta da sa
could result in electrical shock ar personal
injury from vacuum cleaner suddenly
starting.
BELT CHANGING AND AGITATOR CLEANING
J
TO REMOVE BELT
1. Turn off and unplug vacuum cleaner.
2. Turn PowerMate upside down.
3. Unscrew the two (2)
PowerMate cover screws.
4Tur0
PowerMate top
side up. Press _j
handle release _ _,_-
pedal and lower _- .........._
the swivel. Lift \_" _/
rear latches up. Side ear
" R
Latch Latches
5. To remove cover_
grasp the sides and
pull out.
6. Lift agitator
assemblyout
and remove
worn belt.
7. Check and clean end cap areas. See
AGITATOR ASSEMBLY (page 24) for picture
of complete agitator assembly.
- 23 -