Suggested Pile Height Settings; Attachments - Kenmore 116.28014 Use & Care Manual

SUGGESTED PiLE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
H[ = Shag, deep pile, or scatter rugs.
MED = Medium to deep pile.
LO - Low to medium pile.
XLO = Most carpets and bare floors.
ATTACHMENTS
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON. This
could cause sparking and damage the
electrical contacts or electronic controls.
ATTACHMENTS ON HANDLE
NOTE: if the
PowerMate is
attached, turn
vacuum clean- -Handle
er off before Lack
removing han- t
die from
wands. Handle
Quick i m_
1. Press handle Release --_'-'
quick release
button and pull
up on handle. Ill
2. Slide attachments firmly
on handle as needed. See
ATTACHMENT USE TABLE.
ATTACHMENTS ON WAND
1. To remove
wand from
PowerMate,
lock wand in
straight-up
position.
_,_.__- and
Quick
Release
Pedal
3. Put attach-
ments on wand
as needed. See
ATTACHMENT
USE TABLE.
2. Press wand
quick release
pedal with foot
and pull the
wand straight up
and out of
PowerMate.
CONTOUR BRUSH
The contour brush will attach to the handle
or wand for overhead cleaning of furniture
such as cabinets and shelves.
I. Rotate the contour
brush and lock into S_'-_
place.
2. Attach the contour
brush to the handle or
wand.
-13-