Tide Vector/Course Plot Section; Tide Vector Display - Furuno CI-35 Operator's Manual

TIDE VECTOR
` Each tide vector can be switched on and off independently by MENU 1 - "LAYER n" setting.
(Refer to page 4-2.)
` Tide differential vectors can be switched on and off by MENU 1 - "TIDE DIF DISP" setting.
(Refer to page 4-2.)
` Each vector bar indicates "flowing to" own ship direction with the standard factory setting. It is
possible to reverse the pointing direction to "flowing from."
Tide differential
vectors.
Note: If vector bars of two or more layers point in the same direction, only the vector bar and the
direction mark of the shallowest layer appear.
Ground Tracking Mode
(See page 3-6)
1
Absolute tide movement
(YEL)
of layer 1
2
Absolute tide movement
(PPL)
of layer 2
3
Absolute tide movement
(L-BLU)
of layer 3
4
Tide differentials between a specified reference layer and the other two layers.
5
(Ex. Ref. Layer = #2)
3-10

TIDE VECTOR/COURSE PLOT SECTION

Display
4
W
5
Water Tracking Mode
Relative tide movement of
layer 1 based on surface
layer.
Relative tide movement of
layer 2 based on surface
layer.
Relative tide movement of
layer 3 based on surface
layer.
PPL YEL
. . . . . . .
2 1
. . . . . . .
2 3
LBLU
PPL
1
N
2
E
S
(See page 3-6)
PPL YEL
PPL LBLU
Ref. layer
(Left half)
Tide vectors
3
Heading line
Presented in North-up
mode only.
Nav-aided Mode
(See page 3-6)
Absolute tide movement of
layer 1 (nav-tide)
Absolute tide movement of
layer 2 (nav-tide)
Absolute tide movement of
layer 3 (nav-tide)
PPL
YEL
PPL
LBLU
Measuring layer
(Right half)