Attenuator Status Indicators - Agilent Technologies Agilent 8163A Manual

Setting Attenuation and/or Power Levels
Table 14 Attenuator Status Indicators
218
Use Triggers

Attenuator Status Indicators

Status Indicator Description
B (or Busy) The Attenuator's filter is transitioning to a new setting.
Offs
Any combination of an
applied.
Exa
An exact
Int
An interpolated
Ext
An extrapolated
PC The Power Control feature is on (81576A/77A)
Exp There is either too much, or too little, input power for the
(81566A/67A/76A/ 77A Attenuator module to set or maintain your desired P
only)
RiL The Remote Interlock Connector of your mainframe is open. No
measurement is possible until the connection at the
Remote Interlock Connector closes.
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
How to Use a Variable Optical Attenuator module
offset, P offset, or Offset(
offset has been applied.
offset has been applied.
offset has been applied.
How to
has been
.
SET