Exhaust Filterchanging - Kenmore 116.21714 Use & Care Manual

EXHAUST FILTERCHANGING
I
The exhaust filter must be replaced regularly. Replace the exhaust filter when the entire sur-
face area is covered evenly. The exhaust filter CANNOT be washed as it will lose its dust
trapping ability.
NOTE: Use replacement exhaust filter STYLE EF-1 or I(C381(CENI000, see part number detail
in REPLACEMENT PARTS (page 5).
,_k WARNING
Fire and!or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter installed.
Do not operate without filler cover
installed.
1. Pull out and down on
the exhaust fiffer cover
to remove from the
canister and lay aside.
Filter
2. Pull the exhaust
filter up and out
from the rear of
the canister.
3. Replace the
exhaust filter.
Place the new
exhaust fitter
into the
canister with
the foam seal
facing towards
the canister,
4. Replace the
exhaust filter cover
by placing the two
tabs on the filter
cover into the slots
on the canister and
rotate into place
Stofs
\\
T_bs until it snaps closed.
23