Lldp (Link Layer Discovery Protocol) Commands - Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual

7.11.2.5 voice vlan data priority
Use this command to either trust or entrust the data traffic arriving one the Voice VLAN port.
Syntax
voice vlan data priority untrust | trust
Default Setting
trust
Command Mode
Interface Config
7.12

LLDP (Link Layer Discovery Protocol) Commands

7.12.1 Show Commands
7.12.1.1 show lldp
This command uses to display a summary of the current LLDP configuration.
Syntax
show lldp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Transmit Interval: Shows how frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold Multiplier: Shows the multiplier on the transmit interval that sets the TTL in local
data LLDPDUs.
Re-initialization Delay: Shows the delay before re-initialization, in seconds.
Notification Interval: Shows how frequently the system sends remote data change notifications, in
seconds.
- 284 -