Getting To Know Your Router; Front Panel - Belkin GO N300 DB User Manual

gETTing TO KnOW YOUR ROUTER

front Panel

b
a) status light
Your Router's status is shown by the light on the front.
Off: The Router is not plugged into a power source.
blinking blue: The Router is starting up.
solid blue: The Router is connected to the Internet.
blinking amber: The Router can't detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
a
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, refer to the Router's web
interface. The small light near the WPS button shows what is
happening while you are using WPS to establish a connection.
Off: Idle
blinking blue: The Router is listening for a WPS-enabled
computer or other device.
solid blue: The Router has made a secure connection with
the computer or other device.
amber: A connection was not created.
4