Panasonic CF-30 Series Reference Manual page 44

Modem
Connecting the Internal Modem with a Telephone Jack
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing so may lead to a fire or electric shock.
You cannot connect the modem to the following lines.
• Interphone
• Intercoms
• ISDN
Be sure to connect the telephone cable into the modem port, not into the LAN port.
Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.
1
Slide the latch (A), open the cover and connect the telephone
jack (B) to the computer by using the telephone cable (included)
(C).
Hold the cable so that the shape of the connector (D) matches the port, and
insert fully until it clicks.
2
Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] and change the settings as neces-
sary.
NOTE
Do not enter standby or hibernation during communications.
To remove the cable, press and hold the lever and pull out.
44