Security Measures - Panasonic CF-30 Series Reference Manual

Security Measures

Use these features to protect your data.
Other security measures
• SD Security ( page
• Embedded Security (TPM) (
Module (TPM)".
Setting the Supervisor Password/User Password
Set the Supervisor Password before setting the User Password.
1
Start up the Setup Utility (
2
Select [Security].
3
Select [Set Supervisor Password] or [Set User Password], and press
4
Enter your password in [Enter New Password] and press
When the password has been set, you need to enter your password in [Enter Current Password] and press
Enter.
To disable the password, leave the input field empty and press Enter.
5
Enter your password again in [Confirm New Password] and press
6
In [Setup Notice], press
7
Press , and then select [Yes] and press
F10
CAUTION
Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Con-
tact Panasonic Technical Support.
When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people
may set or change the password.
NOTE
The password will not be displayed on the screen.
You can use up to 32 alphanumeric characters (including spaces).
• The case (upper/lower) is ignored.
• To input numbers for the password, you cannot use the numbered keys on the keyboard.
• You cannot use Shift and Ctrl to input a password.
Disabling the Supervisor Password also disables the User Password.
29)
page 66): For further information, refer to the Installation Manual of "Trusted Platform
page
.
Enter
60).
.
Enter
13
.
Enter
.
Enter
.
Enter