Table of Contents
Advertisement
Selecting the Cool Mode
10
E-
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling
1
If necessary, press the
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
- The temperature is adjusted by 1°F
- The indoor unit beeps
I f the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
I f the room temperature reaches the set temperature, the
air conditioner stops cooling, but the fan operates consistently.
4
Press the
button to select the fan speed until the required settingis
displayed.
Automatic (rotated :
Low
Medium
High
Maximum
Result:
Each time you press the
The fan speed indicator increases and decreases
continuously and turns round each time you press the
button.
5
To control the airflow direction, refer to pages 16 and 17.
(On/Off) button.
is displayed.
button:
button, the indoor unit beeps.
button.
)
Hide quick links:
Advertisement
Table of Contents
