Installing The Battery; Replacing The Back Cover - Samsung RUGBY III User Manual

Installing the Battery

To install the battery:
1. Insert the battery into the opening on the back of the
phone, making sure the metal connectors align (1).
2. Press the battery down until it clicks into place (2). Make
sure the battery is properly installed before replacing the
cover.

Replacing the Back Cover

Once the SIM card and battery have been installed, replace
the back cover.
1. Place the cover back on the bottom of the handset (1)
then press down firmly (2).
2. Press down along the edges to make sure the cover is
flush with the phone and that there is a tight seal.
3. Turn the slot on the back cover lock clockwise until the
cover locks.
Important! When placing the cover back on the phone, press
down firmly along the edges to ensure that the
cover is flush with the phone. This ensures that the
battery compartment is pressurized.
Note: The battery must be properly installed before charging
the battery or switching on the phone.
Getting Started 5