Samsung SRD-440 User Manual page 41

Formatting
You can format a storage device.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <Format>.
A window for selection of device for formatting appears.
3. Use direction buttons ( ◄ ►) to select a device to be
formatted.
4. Select <Format> on the bottom of the screen.
Press <OK> on the "Manage" confirmation window will
start formatting the selected device.
5. When the formatting is done, press <OK>.
M 
Even when formatted, used HDD space will not be 0 GB due
to the space reserved by the system required for operating.
HDD Alarm
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <HDD Alarm>.
A window for setting HDD check and replace output ports
and their durations appears.
3. Use direction buttons ( ◄ ►) to move to the desired
item.
• Alarm
- Alarm signal will output through the alarm out port on the
rear side when selected <1>.
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
• Duration : Sets the alarm duration for the alarm signal and beep sound.
Storage Device
Format
Device HDD Alarm
Device Select Used/Total
HDD 1 0G/499.49G
Format
OK Cancel
Storage Device
Format
Device HDD Alarm
Device Select Used/Total
HDD 1 0G/499.49G
Manage
Formatting deletes all recordings.
Proceed formatting?
OK Cancel
Format
OK Cancel
Storage Device
HDD Alarm
Device Format
 Check Alarm Output Port 1 BEEP
All
 Duration
OFF
 Replace Alarm Output Port
1 BEEP
All
 Duration
OFF
OK Cancel
Used
Internal
Used
Internal
English _41