Part Names And Functions (Rear) - Samsung SRD-440 User Manual

overview

PART NAMES AND FUNCTIONS (REAR)

1 2
3 4
VIDEO IN
Part Names
VIDEO IN
VIDEO OUT (SPOT)
AUDIO IN
VGA
NETWORK
DC 12V
USB
ALARM IN
ALARM OUT
RS-485
SERIAL
AUDIO OUT
M 
If the VGA cable is connected, the video source from the VGA adaptor will be played as main screen. Then, the
[VIDEO OUT] signal will be changed to the Spot signal.
The monitor distributor is not supported.

To play the video from the VGA adaptor properly, the DVR must have set to turn on the VGA monitor.

The man screen is defaulted to [VIDEO OUT]. If you change it to the VGA source, the [VIDEO OUT] source will be
changed to the Spot signal.
10_ overview
AUDIO IN
VGA
VIDEO OUT (SPOT) AUDIO OUT SERIAL
Input port for the composite video signal.
BNC type of output port for the composite video signal.
Input ports (RCA jack) for the audio signal.
Output port for VGA video signal.
NETWORK connector port.
DVR power input port.
USB connector port.
1~4, G : Alarm Input port.
1, COM : Alarm Output port.
Used to establish RS-485 communications.
Serial port for connecting to a POS device.
Output port (RCA jack) for the audio signal.
ALARM OUT
1 COM
ALARM IN RS-485
1 2 3 4 G G +
CONSOLE
Functions
NETWORK
DC 12 V
USB