System; General - Genie GDVRH-616 User Manual

8. SYSTEM

8.1. GENERAL

Control ID: Each DVR that is preconfigured with the control ID is enabled to respond
1.
to, and be operated by, the remote control.
- To select the DVR to be controlled with the remote controller, press and hold the DVR
ID button. While holding the DVR ID button, press the appropriate DVR ID number.
For example, enter 05 for DVR ID 05, enter 43 for DVR ID 43 etc. Set the ID of IR
controller on "00" to control multiple DVR's at the same time, whatever the DVR ID is.
DVR Name: Type a DVR name to distinguish its location when you have several
2.
DVR's on a Network.
KEY TONE: By default, the DVR emits a beep every time a button is pressed. Set
3.
the key tone to OFF to turn the button beep off. By default it's "ON"
PB DEINTERLACE
4.
ON: Reduces image flicker but also reduces picture quality.
OFF: Better picture quality for still images but may have flicker on moving pictures.
AUTO LOGOUT: You can configure the DVR to automatically log users out.
5.
By default it's "OFF". [OFF
S.M.A.R.T. MONITOR: Turn ON or OFF to display HDD information in the SMART
6.
STATUS tab of the DISK menu.
1 Minute 3 Minute
68
5 Minute 10 Minute]