Multi-Media; Voice Messages - Honeywell Tuxedo Touch Series Home Automation System User Manual

The Multi-Media feature allows you access voice messages, play video files, display a slide show of personal photos, and view up
to four cameras at once from your keypad.
U L
Multi-Media functionality is supplementary only and has not been evaluated by UL.

Voice Messages

The Tuxedo Touch Keypad can record voice messages for others on the premises. The number of messages is not limited;
however, the total time of all messages added together cannot exceed 120 seconds. Note: The voice messages are stored in the
memory and all messages are lost if the keypad loses power or if it is reset.
Recording/Retrieving Messages
Voice messages are recorded and retrieved using the "Message Center" screen. To access messages, do the following:
ICON
1. From the Home screen, press Multi-Media
then press the Message icon.
2. Press the Record icon and record your
message while staying within approximately
one foot of the keypad and speaking at a
normal voice volume.
3. Press the Stop icon when you are done
recording the message.
To retrieve a voice message;
4. Select from the message list and then press
the Play Message icon. Use the Pause
button to pause the playback.
5. To listen to the next message, press the
Advance One Message and Play icon.
6. If you wish to delete messages, press the
Cancel icon.
7. To exit, press the HOME icon.
Message Icons
Pause Next

Multi-Media

ACTION
Previous
NOTES
As you are recording your message, the remaining time counter counts down
to indicate the total remaining time available and a "Recording New
Memo..." message is displayed above the message list window.
The message indicator flashes and the message is listed in the message list
window.
To record additional messages, repeat steps 2 and 3.
To exit, press the BACK or HOME icon.
As the message is being played, a "Play (x): Voice Memo..." message is
displayed above the message list window.
When the end of the message is reached, the playback stops.
Note: The Message LED will continue to flash until all new messages have
been played back entirely.
The "Delete Memo" screen is displayed.
You can press the Delete Selected button to delete only the currently
selected message, the Delete All button to delete all or the Cancel button to
return to the "Message Center" screen without deleting any messages.
Note: At any time you may highlight a message you want to listen to and
press the Play Message icon.
Use the Pause, Next, and Previous icons to navigate through the list of
messages.
22