More Choices; How To Clear/Hide A Control Panel Message; Advanced System Features; Console Emulation Mode - Honeywell Tuxedo Touch Series Home Automation System User Manual

More Choices

How to Clear/Hide a Control Panel Message

The Control Panel Message icon alerts the user to a control panel message. When a Control Panel Message is displayed, the user
has two options. User can clear the Control Panel Message immediately, or minimize the window and clear it at a later time.
To Clear/Hide the Control Panel Message, do the following:
ICON
1. To clear; press CLEAR.
2. Enter your Authorized Code or,
3. To hide; press HIDE to clear the Control Panel
Message later.

Advanced System Features

While most of the commonly used security functions are available from the keypad's advanced user interface, there are some
less used, advanced features that can either be accessed through Console Emulation mode on the keypad or a standard alpha
keypad. To use features not supported by the keypad, refer to your Control Panel User Guide.

Console Emulation Mode

Console Emulation Mode allows you to use a keypad interface just as you would a regular system keypad. All commands shown
in Console Emulation mode can also be executed from a standard alpha keypad.
Notes:
• It is recommended that you do not use the Console Emulation Mode to enter GOTO commands. Unsatisfactory operation may
result from issuing GOTO commands in Console Emulation.
• Two icon panics (1 & *, 3 & #, and * & #) do not function in the Console Emulation Mode. The A, B, C, and D icons do function
if programmed as panic keys. Check with your system installer for details.
• Commercial systems with Alpha keypads have a feature where if you press a key for 5 seconds, you receive self help messages
about the pressed key or holding the * key for 5 seconds to provide zone descriptors. These features do not function in the
keypad as all key presses are instantaneous.
How to Enter Console Emulation Mode
To access Console Emulation Mode, do the following:
ICON
1. From the Home screen, press the SECURITY
icon.
2. Press the MORE CHOICES icon.
3. Press the CONSOLE MODE icon.
Security (cont'd)
ACTION
ACTION
NOTES
Once your Authorized Code is accepted, the Control Panel Message is
cleared.
If the alarm is still present, press CLEAR again and then enter your
Authorized Code again.
Press the HIDE icon to address the condition later.
NOTES
Perform functions as you would from a standard alpha keypad.
16