Advanced Settings Menu Table - Honeywell TH8110U Installation Instructions Manual

TH8110U TOUCH SCREEN PROGRAMMABLE THERMOSTATS
Installer
Setup
Select Number
Furnace Filter 0500
Change
Reminder
Humidifier Pad 0510
Replacement
Reminder
UV Lamp 0520
Replacement
Reminder
Adaptive 0530
Intelligent
Recovery™
Number of 0540
Periods
Minimum 0580
Compressor
Off Time
Heat 0600
Temperature
Range Stop
Cool 0610
Temperature
Range Stop
Clock Format 0640
Extended Fan 0650
on time Heat
Extended Fan 0660
on time Cool
69-1700
Table 6. Advanced Settings Menu.
Factory Setting
Option Description
0 Furnace filter
change reminder
off
0 Humidifier pad
replacement
reminder off
0 UV Lamp
replacement
reminder off
1 Adaptive
Intelligent
Recovery™
control is
activated (system
starts early so
setpoint is
reached by start
of program
period).
4 Four periods
available (Wake,
Leave, Return,
Sleep)
5 Five minute
minimum off time
for compressor
90 Highest heating
setpoint.
50 Lowest cooling
setpoint.
12 12-hour clock
format
0 No extended fan
operation after
call for heat ends
0 No extended fan
operation after
call for cool ends
Other Choices
Options Description
1-6 1—10 run time days
2—30 run time days
3—60 run time days
4—90 run time days
5—120 run time days
6—365 run time days
1-3 1—90 calendar days
2—180 calendar days
3—365 calendar days
1 1—365 calendar days
0 0—conventional
recovery (system starts
recovery at
programmed time)
2 Two periods availbable
(Wake and Sleep)
0, 2, 3, 4 Minimum number of
minutes compressor is
off between calls for
compressor
40 to 89 Temperature range (1°F
increments) of heating
setpoint.
51 to 99 Temperature range (1°F
increments) of cooling
setpoint.
24 24-hour clock format
90 Fan operation is
extended 90 seconds
after call for heat ends.
90 Fan operation is
extended 90 seconds
after call for cool ends.
10
Comments
Run time based on
call for fan.
—
—
—
Not shown in non-
programmable is
selected. 2 or 4
applies to all days of
the week.
—
Shown in 1/2 °C.
Shown in 1/2 °C.
—
Not shown if fan
operation is set to
fossil fuel or in Cool
Only Systems
Not shown in Heat
Only Systems.