Usb - Honeywell HSVR-04 User Manual

Installation and Connections

USB

24
c. For signal wires that are too long, 120Ω should be connected parallel
between A, B lines on the far end to reduce reflection and guarantee
signal quality.
d "485 A, B" of DVR cannot connect parallel with "485 port" of other
device.
e. The voltage between of A,B lines of the decoder should be less than
5v.
2. Connect the other end of the cable to the proper pins in the connector
on the camera.
3. Please follow the instructions to configure a camera to enable each
PTZ device on the DVR.
Figure 3-3 PTZ Connection Port
The USB port is for the USB storage device and USB mouse. For USB
Backup, please refer to
HSVR-04
RS-485 port
Backup for detailed operation.
HSVR-16
RS-485 port