Maytag MSD2559XEM Service Update Information page 26

KitchenAid Stealth Control Overview and
Programming Instructions (continued)
Back
ICE MODE
Adjusting Temperature Settings
Adjusting Temperature Settings
Press the LOCK pad to raise the temperature set point or press
Press the LOCK pad to raise the temperature set point or press the MAX ICE pad to lower the
the MAX ICE pad to lower the temperature set point. See figure 8.
temperature set point. See figure 8.
Important: When the temperature is changed, the word " CONFIRM" above the filter reset
Important: When the temperature is changed, the word " CONFIRM" above the lter reset pad
pad illuminates and will FLASH without an audible tone constantly until user presses RESET illuminates and will FLASH without an audible tone constantly until user presses RESET FILTER,
ICE MODE or after 60 seconds of inactivity. If the user presses TEMPERATURE to change
FILTER, ICE MODE or after 60 seconds of inactivity. If the user presses TEMPERATURE
compartments, CONFIRM still flashes if one of the temps has been changed.
to change compartments, CONFIRM still flashes if one of the temps has been changed.
NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated. To
NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activat-
return the display setting to Fahrenheit, press LIGHT again
.
ed. To return the display setting to Fahrenheit, press LIGHT again.
.
Back
ICE MODE
Freezer Temperature Setting
After viewing (and adjusting if desired) the refrigerator set point, press TEMPERATURE
Freezer Temperature Setting
to change the display to show the freezer set point. When the zone has been changed,
After viewing (and adjusting if desired) the refrigerator set point, press TEMPERATURE to
"FREEZER" appears on the display screen. Press LOCK to raise the set point, or press
change the display to show the freezer set point. When the zone has been changed, "FREEZER"
MAX ICE to lower the set point. When you have finished viewing (and adjusting if de-
appears on the display screen. Press LOCK to raise the set point, or press MAX ICE to lower the
sired) both the refrigerator and freezer set points, press FILTER to save the settings.
set point. When you have finished viewing (and adjusting if desired) both the refrigerator and
freezer set points, press FILTER to save the settings. See figure 9.
See figure 9.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
Recommended Setting
Refrigerator
Units Select Zone
LIGHT TEMPERATURE
MAX ICE
Hold 3 Sec.
Figure 8
Recommended Setting
Freezer
Units Select Zone
LIGHT TEMPERATURE
MAX ICE
Hold 3 Sec.
Figure 9
Lower
Raise
-
+
Confirm
LOCK RESET FILTER
Hold 3 Sec. Hold 3 Sec.
Lower
Raise
-
+
Confirm
LOCK RESET FILTER
Hold 3 Sec. Hold 3 Sec.
23
Save