Maytag MSD2559XEM Service Update Information page 24

KitchenAid Stealth Control Overview and
Programming Instructions (continued)
ICE MODE
Pressing any control button will activate the "Normal/Home " display screen, without changing
any settings. See figure 5.
After activation, changes to any settings can then be made. If no changes are made within 2
minutes, the display will re-enter "sleep" mode.
Factory Preset Temperatures
The refrigerator and freezer controls are preset at the factory. The factory recommended set
points are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer
Back
ICE MODE
To View and Adjust Set Points:
Press and hold the TEMPERATURE button for 3 seconds. When adjust mode is
Activated, the display screen shows the refrigerator set point and "REFRIGERATOR" appears in the
display. See figure 6.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
LIGHT TEMPERATURE
Hold 3 Sec.
Figure 5
Recommended Setting
Refrigerator
Units Select Zone
LIGHT TEMPERATURE
Hold 3 Sec.
Figure 6
21
MAX ICE LOCK RESET FILTER
Hold 3 Sec.
-
+
MAX ICE LOCK RESET FILTER
Hold 3 Sec. Hold 3 Sec.
Hold 3 Sec.