Adjusting Temperature Set Points - Maytag MSD2559XEM Service Update Information

KitchenAid Stealth Control Overview and
Programming Instructions (continued)
Back
ICE MODE

Adjusting Temperature Set Points:

Adjusting Temperature Set Points:
Pressing and holding TEMPERATURE starts a 3,2,1 second countdown. During the countdown
Pressing and holding TEMPERATURE starts a 3 second countdown on the display.
using the dispenser cancels the countdown and no dispensing is permitted. The number '3' blinks
3 times and an 'invalid' tone sounds 3 times,. The user has to release both the pad and the button
During the countdown using the dispenser cancels the countdown and no dispensing
and press the button again to start the countdown over. During the countdown, pressing any other
is permitted. The number '3' blinks 3 times and an 'invalid' tone sounds 3 times. The
button or releasing the pad cancels the countdown and the '3' blinks 3 times and the 'invalid' tone
user has to release both the pad and the button and then press the button again to
sounds 3 times. The user has to start over.
start the countdown over.
Please note: the blinking and toning is synchronized so that the moment the number '3' blinks, the
During the countdown, pressing any other button or releasing the pad cancels the
tone is sounded. After 3 seconds, the TEMPERATURE shows up with the CURRENT refrigerator
countdown and the '3' blinks 3 times and the 'invalid' tone sounds 3 times. The user
setting. See figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compartments and
has to start over.
displays the current setting.
Note: The blinking and toning is synchronized so that the moment the number '3'
Pressing the ICE MODE pad or after 60 seconds of no activity, the display will revert back to the
blinks, the tone is sounded. After 3 seconds, the TEMPERATURE shows up with the
normal screen.
CURRENT refrigerator setting. See Figure 7.
Pressing TEMPERATURE changes between the refrigerator and freezer compart-
ments and displays the current setting. Pressing the ICE MODE pad or after 60
seconds of no activity, the display will revert back to the normal screen.
*Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing.
Recommended Setting
Refrigerator
Units Select Zone
LIGHT TEMPERATURE
Hold 3 Sec.
Figure 7
-
+
MAX ICE LOCK RESET FILTER
Hold 3 Sec.
22
Hold 3 Sec.