Kenmore 318201473 Installation Instructions Manual page 4

13" (33cm)max. d epth ,
forcabinet installed a bove
cooktop
30" (76.2cm)Min.
Clearance Between t he
TopoftheCooking
Platform andtheBottom
ofanUnprotected Wood
or Metal C abinet
24" (61cm)Min.
when Bottom ofWoodjlf
or Metal C abinet i s
Protected b yNotLess
ThanI/8" Flame
Retardant Millboard
Covered With Not Less
Than No. 28 MGS
Sheet Steel, 0.015"
(0.4 mm) Stainless
Steel, 0.024" (0.6 mm)
Aluminum or 0.020"
(0.5 mm) Copper
"_-. _min
"l_ between rear edge of
cutout and nearest
combustible surface
18" (45.7 cm) P
Min.
30" (76.2 cm) min.
clearance between
the top of the
cooking platform and
the bottom of an
unprotected wood or
metal cabinet.
_To eliminate the risk of
burns or fire from reaching over heated
surfaces, cabinet storage space located
above the cooktop should be avoided. If
cabinet storage is provided, risk can be
reduced by installing a range hood that
projects horizontally a minimum of 7"
(17.8 cm) beyond the bottom of the
cabinets.
It is not recommended to use
drawer underneath cooktop.
30" (76.2 cm) 30" (76.2 cm) 5" (12.7 cm) 5" (12.7 cm)
Figure 3 - CABINET DESIGN