JnstaJJation
STEP 3 iNSTALL
SiDE TRiM
FOR 30" CABINET iNSTALLATiON
ONLY. SKiP
THiS STEP iF Y0U HAVE 27" WIDE CABINETRY.
J
J
_b
• Open the oven door.
Hang the side trim pieces on the tabs behind the
oven flange.The screw holes in the side trim shouJd
aJign with the hobs in the oven flange.
Check to be sure the oven is pushed back into the
opening and against the cabinet frame.
STEP 4 INSTALL
MOUNTING
SCREWS
E_Q
• Drill pilot holes through the side flanges, 2 on each
side.
• Drive the color matched screws into the side flange
(and side trim, if applied).
STEP 5 FINALIZE INSTALLATION
• Turn power on atthe source. The interior light
should come on when the door is opened.
• Refer to the Owner's Manual for operating
instructions.
9