Step 1 Slide The Oven Into The Cutout; Step 2 Install Bottom Trim - GE Advantium SCB1000 Installation Instructions Manual

120 built-in speedcook ovens
Hide thumbs Also See for Advantium SCB1000:
Table of Contents

Advertisement

mnstammation
STEP 1 SLIDE THE OVEN INTO
THE CUTOUT
CAUTION: Two people are required to lift the oven
into the opening. Grasp the bottom at the front and
rear. DO NOT USE THE HANDLE TO LIFT THE OVEN.
DAMAGE WILL OCCUR!
MISE EN GARDE : Deux personnes sont nGcessaires
pour soulever le four et I'ins_rer dans I'ouverture.
Saisissez-le par le dessous, _ I'avant et _ I'arri_re.
N'UTILISEZ PAS LA POIGNEE POUR SOULEVER LE
FOUR, DES DOMMAGES SE PRODUlRONT !
• Lift and hold the oven at the front of the opening,
Hold the oven at a 450 angle and plug in the power
cord.
• Carefully, slide the oven into the cabinet part way.
Leave the oven a few inches forward of the cabinet
frame,
• Checkto be sure the power cord is not trapped
under the oven or along the sides of the oven,
STEP 2 INSTALL BOTTOM
TRIM
• Align bottom trkn tabs to slots in the bottom of the
oven.
=
• Secure the bottom trim to the bottom of the oven
using 3 brass screws provided.
L
8

Advertisement

Table of Contents
loading

Table of Contents