Important Message - Toshiba R950 User Manual

Hide thumbs Also See for R950:
Table of Contents

Advertisement

Blu-ray™ discs
Writing discs
The TOSHIBA Disc Creator is provided as writing software with this
computer.
TOSHIBA Disc Creator can be used to write data.
You can use the DVD Super Multi drive to write data to either CD-R, CD-
RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW or
DVD-RAM discs.
You can use the Blu-ray™ Writer drive to write data to either CD-R, CD-
RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-
RAM, BD-R, BD-R DL, BD-RE or BD-RE DL discs.
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket. It is
possible that, if data is written while powered by the battery pack, the write
process may sometimes fail due to low battery power - in these instances
data loss may occur.

Important message

Before you write or rewrite to any of the media supported by the Optical
Disc Drive, please read and follow all of the setup and operating
instructions in this section. If you fail to do so, you may find that the Optical
Disc Drive may not function properly, and you may fail to write or rewrite
information successfully - this may cause you to either lose data or incur
other damage to the drive or media.
Disclaimer
TOSHIBA does not bear responsibility for the following:
Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. In view of this, it is good practice to make
User's Manual
BD-R, BD-R DL discs can be written only once. The recorded data
cannot be erased or changed.
BD-RE, BD-RE DL discs can be recorded more than once.
Damage to any disc that may be caused by writing or rewriting with
this product.
Any change or loss of the recorded contents of media that may be
caused by writing or rewriting with this product, or for any business
profit loss or business interruption that may be caused by the change
or loss of the recorded contents.
Damage that may be caused by using third party equipment or
software.
3-18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents