Getting Started; Accessory List; Adjusting Volume; Turning Power On And Off - Alpine CDE-130RR Owner's Manual

Getting Started

SOURCE/
Rotary encoder
VIEW

Accessory List

• Head unit ............................................................................1
• Power cable........................................................................1
• Mounting sleeve.................................................................1
• Carrying case .....................................................................1
• Bracket key.........................................................................2
• Rubber Cap ........................................................................1
• Bolt Stud ............................................................................1
• Owner's Manual .......................................................... 1 set

Turning Power On and Off

Press SOURCE/
to turn on the unit.
• The first time power is turned on, the volume will start from level 18.
Press and hold SOURCE/
turn off the unit.
Detaching and Attaching the Front
Panel
Detaching
1
Turn off the unit power.
2
(Release) at the upper right side until the
Press
front panel pops out.
3
Grasp the right side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
for at least 2 seconds to
Attaching
1
Insert the left side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the right side of the front panel until it locks
firmly into the main unit.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.

Adjusting Volume

Turn the Rotary encoder until the desired sound is
obtained.
Adjusting Volume : 0 ~ 40
Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the
remote-control sensor.
Remote control sensor
4
-EN