GEAR LEVER, HANDBRAKE
To select reverse gear
(vehicle stationary)
Follow the grid shown on knob 1.
The reversing light will come on as
soon as reverse gear is selected (igni-
tion on).
An impact to the underside of the vehicle (eg. striking a post, raised kerb
or other street furniture) may result in damage to the vehicle (eg. defor-
mation of an axle).
To prevent any risk of accident, have your vehicle checked by an ap-
proved dealer.
2.10
1
Handbrake
To release
Pull lever 2 up slightly, press button 3
and then lower the lever to the floor.
3
2
To apply
Pull lever 2 upwards and make sure the
vehicle is immobilised.
When driving, make sure
the handbrake is com-
pletely released.
Risk of overheating.
When
the
vehicle
stopped, depending on the
gradient and/or the vehicle
load, it may be necessary to
apply the handbrake by at least two
further notches and engage a gear
(1
or reverse).
st
is