Renault Captur Handbook page 86

SToP AND START
function (3/3)
1
2
Deactivating, activating the
function
Press 1 to deactivate the function.
The message "STOP AND START
DEACTIVATED" will appear on the in-
strument panel and the integrated
warning light 2 on the switch will light
up.
Pressing this again will reactivate the
system. The message "STOP AND
START ACTIVATED" will appear on the
instrument panel and the integrated
warning light 2 on switch 1 will go out.
2.8
The system is automatically reactivated
each time the vehicle is started using
the start button (please see "Starting,
stopping the engine)".
Special note: engine on standby,
press switch 1 to automatically restart
the engine.
Before getting out of the
vehicle, you must switch
off the ignition by pressing
the engine stop (please see
"Starting, stopping the engine").
operating faults
When the message "CHECK STOP
AND START" appears on the instru-
ment panel and the integrated warn-
ing light 2 lights up on the switch 1, the
system is deactivated.
Please consult an authorised dealer.
In the event of an emer-
gency, the engine can be
restarted by pressing on the
clutch pedal if the Stop and
Start function is activated.