Battery Performance; Specifications - Nikon MD-12 Instruction Manual

Motor drive
Hide thumbs Also See for MD-12:
Table of Contents

Advertisement

BATTERY PERFORMANCE

Battery performance varies greatly, depending on its type
and age, as well as on operating conditions, including tem-
perature. Consequently, the number of rolls that can be ex-
posed with one set of batteries cannot be accurately pre-
dicted. As a guide, however, you can expect to be able to
expose more than a hundred 36-exposure rolls of film per
set of alkaline-manganese batteries.
Since batteries have poor low-temperature characteristics,
battery performance diminishes considerably as the tem-
perature decreases. This results in slower shooting speed and
reduced film transport capacity. Alkalinemanganese batter-
ies, in particular, suffer severely at temperatures below 0 C.
Distributed by WWW.LENSINC.NET

SPECIFICATIONS

Camera fitting:
Shooting speed:
Shooting speed:
3.5 fgs approx. maximum (at shut-
ter speeds faster than 1/125 sec.)
Shooting mode:
Single frame (S)
Continuous (C)
Usable shutter
speeds:
At "S" setting
FM 1 ~ 1/1000 sec.
FE 8 ~ 1/1000 sec., Auto, M90
At "C" setting
FM 1/2 ~ 1/1000 sec.
FE 8 ~ 1/1000 sec., Auto, M90
Pilot lamp:
LED lights up when in operation
Power switch:
On/off switch provided (also acts as
camera's meter switch
Meter switch:
Trigger button also acts as meter
"on" switch and automatically goes
"off" approx. 50 seconds later
Remote control:
Possible; uses standard Nikon 3pin
connector.
Power source:
Eight 1.5V penlight batteries (AA
size, in integral battery chamber)
Weight: Dimensions:
Approx. 41 0g (without batteries)
Nikon FM, Nikon FE
Approx. 144 x 36 x 42mm;
approx. 144 x 68.5 x 109.5mm (in-
cluding the grip)

Advertisement

Table of Contents
loading

Table of Contents