Kenmore 78183 Owner's Manual page 7

_Pult thebottom w indow s ash down b ehind the
upper guide u ntil they meet.
NOTE:
• Donot p ull t he window s ash down s otightly that
the movement ofsliders isrestricted. Attach t he
cabinet tothe window s tool bydriving t he TYPE B
screws _ through the cabinet into window s tool.
, The cabinet should be installed with a very slight
tilt downward toward the outside 1/4 bubble on
carpenters tevel.
_ Expand side curtains to fill opening.
Attach each side curtain to the window sash using
(4) TYPE C screws _, (FIG. 12)
S¢_-ew 0
(Ty_ C)
FIG. 12
B Attach the window locking bracket with a
TYPE C screw _ See FiG, i3.
FIG. 13
_ Slide the chassis into the cabinet. (FIG. 14)
CAUTION: For security purpose, reinstall screws at
cabi net's sides.
Power
Cord
Screw
Screw PIG. 14
_Cut the foam seai to the proper tength and
insert between the upper window sash and the
lower window sash. (FIG. 15)
FIG. 15
_ Adjust the vent handle before the decorative
front is attached. (FIG. 16)
Straighten the lever, as shown, Pulling down part _)
to align with part ,{[_,,
Part l_',
FIG. 16
-7-