Control Panel - Kenmore 580.76100 Owner's Manual

CONTROL PANEL
REMOTE CONTROL SIGNAL RECEIVER
©©L, !-, ! '( {
@_'+SIR
- TEMPERATURE SETTING
"Use these buttons to automatically control the
temperature of the room. The temperature
can be set to one of a temperature between
64°F to 82°F.
,,Push the TEMP up or down buttons to shift
the temperature setting from
82°F _.76°F _.70°F _64°F
ITIMER OPERATION
The timer can be used to either turn on
or turn off the air conditioner:
- Timer function for turning ON
the air conditioner:
POWER
,,Toturntheair conditioner ON,pushthis button.
Toturntheair conditioner OFF,push
thebuttonagain.
,,Thisbutton takespriority overanyotherbutton.
,,Whenyoufirstturnit on,theair conditioner is on
theHighcoolmodeandtheTemp.at 70°F.
AUTO RESTART
,, in the event of a power failure,
the unit wil run at the previous.
• With the POWER off, press the timer button to the number of hours when you
want the air conditioner to come on. This model wil come on in either 1 hour, 3
hours, 6 hours or in 10 hours.
• If it is 7 am and you want the unit to come on at 5 pm press the timer button twice
so that a '10' shows up in the control panel window. The unit will come on in 10
hours. You do not need to press the POWER button to turn on the unit. The timer
function will turn it on automatically in 10 hours.
- Timer function for turning OFF the air conditioner:
*This function will work only when the unit is already running and powered on.
Select the number of hours you want to shut off time. If it is 9 pm at night and
you want the unit to shut off at 12 am (midnight), press the tmer button twice so
that a '3' shows up in the control panel window. The unit will shut off in 3 hours.
•The timer function can be set in 1 hour, 3 hour, 6 hour and 10 hour increments.
You can set the unit to come on in 1 hour, 3 hours, 6 hours or 10 hours which is
the maximum delay time; or you can enter these same number of hours
(maximum of 10 hours) until the unit will shut off.
,The delay timer functions to either turn on in a certain number of hours or turn off
in a certain number of hours by manually inputting the number of hours.
MODE
• Push this button to shift the mode of operation from COOL=HI _ COOL=LOW _ FAN ONLY=HI I_ FAN ONLY=
LOW.
-11 -